Features & Applications

The Cooper-Atkins Multi Probe Humidity and Temperature Tester is a feature packed meter that consistently beats out the competition. It includes 2 temperature probes and a Relative Humidity probe. The electronics are built into a rugged case. Temperature range is -40/300F (-40/150C). RH range is 10/95%. Special features include Wet Bulb, F/C, Backlight, Temperature Differential, Scan Mode and Auto Shut-off.

Whether it's HVAC/R applications, storage management, computer room monitoring, or troubleshooting, the operator will find this to be an accurate and fast service tool.

Features:

• Three Zone
• Min/Max Memory
• Auto Shut-Off after 15 minutes of non-use or continuous ON mode
• Temperature differential between zones 1 and 2
• %RH and wet bulb

Applications

• HVAC/R applications
• Storage management
• Computer room monitoring
• Troubleshooting

Spec Summary:

Technology Base:	Thermistor
Temperature Range:	-40° to 300°F / -40° to 150° C
Temperature Accuracy:	±0.3°F/0.2°C or ±0.5% Rdg, whichever is greater
0.1°:	0.1 °F/°C, 1% RH
Humidity Range:	10 to 95% RH
Humidity Accuracy:	±3% from 10 to 90% RH / ±4% below 10% and above 90% RH
Ambient Operating Conditions (Temperature, Humidity, etc.):	0 to 130°F / -18 to 54°C max / 10 to 95% RH, 90% non-condensing
Display Type/Size:	4 digit .5
Backlight:	Yes
LO:	Yes
HI:	Yes
LO-P:	Yes
°F:	Yes
°C:	Yes
%RH:	Yes
1, 2, or 3:	Yes
CL:	Yes
SCAN:	Yes
Case Dimensions:	9.5
Weight:	1.9 lbs / 862 g
Power Supply:	(1) 9V Alkaline
Auto Shut-off:	Yes
Calibration:	Factory Calibrated To Specifications.
Includes:	Model 1075 General Purpose Probe, 4011 Surface Probe, 5028 Humidity Probe, hard carrying/storage case, (1) 9V battery